1K Prime Filler

CHF18.75
Tax included *
Lead time: 1 to 4 weeks

ColorMatic 1K primer filler is a fast-drying all-purpose 1K primer with excellent adhesion and corrosion preventive and filling properties for all metal surfaces and conventional plastics which are use in automotive. It can be welded and is re-sprayable with all standard water-based base-coats and 1K and 2K topcoat systems. It is fast drying and, depending on layer thickness, applicable both as a primer and a filler.

ColorMatic Primer Filler (HG1 to HG8) offers optimal time and material saving synergy for modern automotive refinishing. HG1 (white) is also suitable as a guide coat white when using dark primers/primer fillers.

Color

Volume discounts

Quantity Unit price You Save
6 CHF15.00 Up to CHF22.50
Quantity
Product available for orders

  • 1K primer filler with very good corrosion protection properties
  • Filler and primer at the same time
  • For isolation of sanded surfaces
  • Short drying time
  • Very good flow
  • Weldable
  • Recoat with ColorMatic water-and solvent-based paints as well as 1K and 2K topcoats

Using Instructions

  • Before use, carefully read and observe the warning texts on the label!
  • Remove all rust from damaged area, clean the surface thoroughly and sand
  • Damaged area must be dry and free of dust and grease
  • Clean undercoat with ColorMatic silicone remover no. 174 469
  • Shake the can well for 2 minutes
  • Carry out spray test
  • Do not overcoat with polyester products
  • For professional use only
  • Wear an appropriate respirator (recommended type A2/P3)

Only two cans per order.

No shipping abroad.

856532

Specific References

You might also like

Customers who bought this product also bought: